NOVEMBER 20, 2024

The Day It Started

A Facebook Marketplace find, a U-Haul trailer, and a 1984 Porsche 944.

What started as a Facebook Marketplace listing turned into a trip to Gilbert, South Carolina, a U-Haul trailer, and the beginning of a restoration that would become much more involved than I ever expected. This is the story of how I found the car, brought it home, and began bringing a 1984 Porsche 944 back to life.
How i found it

It Started With a Facebook Marketplace Ad

I wasn't necessarily looking for a full-blown restoration project when the 944 appeared on Facebook Marketplace. The car was in Gilbert, South Carolina, being sold by Tim Hollis and Mark. From the photos, it looked complete and surprisingly presentable — enough to convince me it was worth making the trip to see it in person.
THE CAR AS I FOUND IT

Worth the Trip to South Carolina

I wasn't necessarily looking for a full-blown restoration project when the 944 appeared on Facebook Marketplace. The car was in Gilbert, South Carolina, being sold by Tim Hollis and Mark. From the listing photos, it looked complete and surprisingly presentable—enough to convince me it was worth making the trip to see it in person. The photo on the left is from the original listing. The photo on the right is mine—the 944 loaded up and headed home.

NOVEMBER 20, 2024

The Trip to Gilbert

I left for Gilbert, South Carolina, with a U-Haul trailer behind me and arrived at 2727 Priceville Road around 9:00 that morning. Waiting there was the 944 I had only seen in the Facebook Marketplace photos.

Seeing it in person confirmed much of what had caught my attention in the listing. The car was complete, the body looked surprisingly good for its age, and it had enough going for it that I was willing to take on whatever problems might be hiding beneath the surface. After meeting with Tim Hollis and Mark, the deal was done. The 944 was mine.

Getting it home presented the first challenge of the project. The car sat low enough that the front valance/lip wasn't going to clear the U-Haul trailer during loading. A couple of strategically placed 2×4s gave us the additional clearance we needed, and eventually the Porsche was safely on the trailer.

t that point, I wasn't thinking about engine swaps, steering-rack rebuilds, fuel systems, brake calipers, or all the other projects that would eventually follow. I simply had a 40-year-old Porsche strapped to a trailer behind me—and I was taking it home.

The deal was done. The 944 was mine.
THE FIRST SURPRISE

The First Days Home

Sometimes the first repair is the one you don't have to make.

Once the 944 was home, I started doing what anyone does with a 40-year-old car they just bought—looking more closely at everything.

One of the first things I noticed was that the power-steering reservoir was empty. That wasn't particularly encouraging. I assumed I was about to discover a bad leak, a failed pump, or another expensive problem.

I filled the reservoir with fluid and tried the steering. To my surprise, it worked. Better yet, there wasn't an obvious leak.

It was a small victory, but also my first lesson with this car: don't assume what's wrong until you've actually figured out what's wrong.

KEEPING THE WATER OUT

A 40-Year-Old Porsche Meets the Rain

The power steering wasn't leaking. Unfortunately, other things were

The first real battle with the 944 wasn’t mechanical at all. It was water. Like a lot of older hatchbacks, the car had developed several places where rain could find its way inside.

The rear hatch was the first obvious culprit. I replaced the hatch seal with an OEM seal, and that took care of the biggest problem. From there, I worked my way around the car, replacing the door, sunroof and rear quarter-window seals as I tried to make the cabin weather-tight again.

The rear quarter windows became a project of their own. I removed and reinstalled them with new seals, although getting the original metal trim back into the rubber proved to be another challenge. That would have to wait for another day.

None of this was particularly glamorous restoration work, but it was important. Before worrying about making the car faster, prettier, or mechanically perfect, I wanted to make sure it could simply sit outside in the rain without becoming a swimming pool.

Before restoring the car, I needed to make sure the weather stayed on the outside.


FORTY YEARS OF WEAR

Starting on the Interior

The outside had gotten me interested in the car. The inside reminded me how old it really was.

The interior was remarkably complete, but four decades had taken their toll. The door panels needed attention, the power-window mechanisms needed to be refreshed, and there were plenty of small things that needed cleaning, repairing or replacing.

Finding the right parts became part of the process. I sourced a replacement driver's door card from 944 Barn and eventually found the passenger side on eBay. While the doors were apart, I went through the window mechanisms as well—cleaning, lubricating and refreshing them (where I could and  replacing parts as required to operate at the intended speeds.

That became a pattern with the 944: take something apart, understand how it works, fix what can be fixed, and replace only what needs replacing.

THE MECHANICAL BASELINE

Time to Find Out What I Really Bought

Before I could enjoy the car, I needed to know what I could trust.

ith the obvious cosmetic and interior issues underway, my attention turned to the mechanical side of the car. A 40-year-old Porsche with an uncertain service history isn't something you simply assume is ready to drive.

The timing belt was at the top of the list. On a 944, it's not maintenance you gamble with, so I took the car to German Automotive for an evaluation and to establish a mechanical baseline.

The estimate was an eye-opener—roughly $12,000 if I addressed everything they identified. That was my first real introduction to the economics of restoring an old Porsche: the purchase price is only the admission ticket.

I didn't authorize everything. The priority was protecting the engine, so the timing-belt and front-of-engine service moved forward. Other items would become projects I could tackle myself.

DOING IT OURSELVES

The First Real DIY Repair

A shop estimate has a way of making you learn how to turn a wrench.

One of the items German Automotive identified was the steering shaft. Rather than adding it to the shop bill, I decided this was something I could tackle myself.

My friend Mark Wilkins joined me, and with a replacement shaft that cost around $350, we went to work. Compared with some of the projects that would come later, replacing a steering shaft sounds almost simple. At the time, it didn't feel that way.

But we got it done.

More important than the money saved was the confidence it gave me. The 944 was beginning to change from a car I took somewhere to have repaired into a car I was willing to take apart and repair myself.

With the new steering shaft installed, Mark and I did what seemed like the appropriate way to celebrate—we took the 944 out for a drive. After spending time underneath the car turning wrenches, getting behind the wheel and feeling the result of something we had fixed ourselves was incredibly satisfying.

It was a small project compared with what was still ahead, but it changed my relationship with the car. Maybe I could do more of this myself than I thought.

THE FIRST ROAD TRIP

The 944 Barn

Sometimes the best part of working on an old Porsche is finally getting to drive it.

With the steering shaft replaced and some confidence beginning to build, it was time to do something other than work on the car. I pointed the 944 toward the North Georgia mountains and 944 Barn in Blairsville.

944 Barn is exactly what the name suggests—a place devoted to keeping these cars alive, with used parts, donor cars and the kind of pieces that can be increasingly difficult to find for a 40-year-old Porsche. Seeing my 944 sitting there among all those other cars made the trip feel a little different. For the first time since buying it, I wasn't just working on an old car—I was beginning to understand the community that exists around keeping these cars on the road.

The trip also gave me an opportunity to actually drive the car. Rather than taking the most direct route, the 944 got a proper introduction to mountain roads, including the Tail of the Dragon. After all the time spent worrying about what might be wrong with the car, I finally had a chance to experience what had made the 944 special in the first place.

I came home with a used exhaust from 944 Barn—and, somewhere along the way, managed to lose the passenger-side front marker light. I ordered a replacement when I got home.

Apparently, even a successful road trip in a 40-year-old Porsche has a parts bill.

STOPPING POWER

Forty-Year-Old Brakes

If I was going to drive the 944, I wanted to know exactly what was stopping it.

With the 944 finally getting some miles under it, I turned my attention to one of the systems I didn't want to take for granted—the brakes.

Rather than simply replacing whatever looked worn, I decided to go through the system properly. The car received new rotors and pads at all four corners, and the calipers became another opportunity to learn how these cars were put together.

The front ATE calipers came apart for cleaning and rebuilding. Years of corrosion and grime were removed, the components were inspected, and the calipers were refinished in satin black before going back together with fresh seals.

Even something as seemingly simple as reinstalling a brake piston came with a lesson. The front pistons have to be positioned correctly in the bore, with the stepped portion oriented at the proper angle. It was another reminder that on an old Porsche, the details matter.

Eventually everything went back together and the 944 had refreshed brakes at all four corners. It was satisfying work—and another system on the car that I now understood rather than simply assuming was okay.

A Lesson I Didn't Forget

Not every lesson came from a repair manual.

At one point I discovered that a bolt securing the driver's-side rear caliper had worked its way completely out. Whether it had simply been left loose during earlier work or hadn't been properly torqued, I couldn't know for certain—but finding a caliper mounting bolt missing gets your attention.

I corrected the problem, but it changed the way I approached the car. With a 40-year-old Porsche whose history I didn't fully know, I couldn't assume that something was correct simply because someone had worked on it before.

From then on, critical fasteners got checked—and checked again.